Testing device for the determination of the seal seam strength according to DIN EN 868-5:2009, appendix D & ASTM F 88

The Performance Qualification (PQ) carried out as part of the initial validation and for revalidation requires determination of the seal strength. Seal samples can be created precisely at the required width of 15 mm using the integrated sample cutter. These are then clamped into the testing machine and peeled at a monitored speed of 200 mm/min. The strength curve is recorded. The supplied software is used to draw up test reports.

Technical Data:

  • Report of the tested seal seam tensile strength on the display
  • Menu guided device operation by keyboard
  • Storage of 10 measurement values
  • PC software and check weight for routine calibration included
  • Aluminium transport box